If you experience that your FEM-Design interface is to small or big so can you change the scale according to the steps below:
Right click on FEM-Design and go to Properties
Related Articles
- Reset the User Coordinate System (UCS)
- FEM-Design and lateral support
- Non-linearity and “Why do I get tension/compression where there should be no tension/compression?”
- How do I connect/disconnect objects
- Model management
- Design groups
- Pick / copy properties
- Quick tools
- Large nodal displacement or rotation
- Sections and fabrication technology
- Trapezoidal Steel Sheet (TRP-plåt)
- Load groups and maximum of load groups results
- Cracked section analysis
- "Load canceled or failed" - recover and prevent damaged files
- Transverse Stiffness of a Profiled Plate
- Mesh settings
- Mesh problems and solutions
- Steel design sections
- Steel bar shell model
- Reinforcement bar - colors of capacity
- Charring depth and the parameter d0
- Load eccentricity on eccentric element
- FEM-Design model opens with the wrong version
- Understanding the edge connections
- Shear capacity without shear reinforcement
- Correct model tool
- Open old model files in the newest version
- Circular covers
- FAQ: 3D Bridge